Edible Photo Cake Printers

Magiclean™ Track Eraser

PhotoFrost® would like you to achieve the best possible performance, reliability and life from your printer. Sometimes you will get ‘tracking’ marks through your prints. Usually this is caused by the icing sheet being too moist & that you need to let them air dry for a few minutes before printing.

The Magiclean™ Track Eraser is used to clean build up of little bits of icing sheets that have become lodged on the printer rollers.

Instructions for Magiclean™ Track Eraser

• Mist the cloth end of the Magiclean™ tool, top side & bottom.
• From the front of the printer, where the paper comes out, place tool in between rollers & metal bat with black rubber rings.
• Gently move the tool straight in & out of the rollers.  Shift to the other side when the Magiclean is out.  Do this 8 - 10 times to insure that the rollers are clean.  (Never move the tool from side to side while in the printer, as this will ruin the rollers).

PhotoFrost® Wide Format Edible Photo Cake Printer

Many people today are seeking for exceptional and personalized ways to prepare desserts. Well, PhotoFrost® is here to give you personalized, yummy desserts!

PhotoFrost® offers everything you need for edible photo cake printing. Our affordable edible ink imaging systems have made it possible for bakers and cake decorators through out the world to show off their creativity and increase their profits, without having to spend thousands of dollars.

We specialize in printing edible pictures and selling edible ink printing systems. We have created custom edible images and sold edible cake printing systems and supplies to thousands of customers since 1999.  Manufacturer Direct!

PhotoFrost® Wide Format Edible Printing System:

• **note: may include equivalent model on availability**
• 1 year Mfg Warranty
• 1 ea Canon ix6820 Wide Format Cake Printer
• 1 ea CLI250/251 Edible Color Cartridge Set 
• 1 ea 8.5x11 Icing Sheets 24 per/pkg
• 1 ea 11x17 Icing Sheets 24/pkg
• Mfg Software CD

PhotoFrost® PowerFlush Printhead Cleaner Tool

PhotoFrost® would like for you to achieve the best possible performance, reliability and life from your printer. The print head is the most sensitive and susceptible component in printer reliability and performance.

It is essential to take proper care of your print head in order to maintain optimum performance and achieve longest possible service life. Inadequate care can result in degradation of print quality or possible premature failure of the print head. User error in this matter can also nullify the warranty.

Instructions

• Remove all cartridges from your print head, replace the orange caps that came with your cartridges back onto your cartridges to reduce leakage.
• Remove print head by lifting the lock bar, bring the print head towards you and then lift.
• Remove seals around the inlet ports with a pair of tweezers and place in a small dish so they can be soaked in cleaning solution.
• The Yellow attachment with rubber cup is for cleaning the larger inlet port (Where the thick black cartridge sits)
• To clean the smaller inlet ports twist off the yellow attachment with rubber cup and use the black hose directly on the smaller inlet ports (Where the color cartridges sit)
• Connect the Power Flush to your sink faucet, turn on the hot water and reduce to a gentle flow. **Caution: Do not over-pressurize the print head, excessive pressure may damage it**
• Press tip of the Power Flush tool into the inlet port and press trigger.As you spray the water thru the print head, observe the bottom of the print head; when you see an even fan spray out from the nozzles your print head is clean.  
• Put the printhead back together and place back in the printer.  Use as usual.